If the instance or community guidelines state “X isn’t allowed,” then it isn’t censorship to remove X. It becomes censorship when mods start removing things for reasons other than enforcing instance or community guidelines. Until that point, it’s just content moderation.

If the c/Androids community guidelines state that “This community is about human-like robots. Posts regarding the phone OS are unwelcome” and a mod removes such a post, that isn’t censorship. Likewise for spam, or reposts, or any number of other things.

On the other hand if the mods remove a post about a human-like robot built in China because they’re sinophobic, that is censorship. Likewise if the human-like robot was built by Tesla, if the lead engineer were a woman, or anything along those lines. Likewise if the post were instead critical of such a robot - still censorship (unless it’s a news only community and the post was free text or a meme).

Likewise if a community’s guidelines state that controversial statements without reputable sources backing them up, statements known to be false, or statements that have been flagged as false by a fact checker are prohibited, then removing such statements isn’t censorship. It’s moderation.

I genuinely don’t understand why people here are taking it so hard that I wish the Immich devs were using semver.

Because you didn’t say that; you said “Breaking changes in a point release? Not cool” and later “I’m basing this off the guidelines at semver.org.”

I’m paraphrasing your comments from memory, to be clear, so apologies if I misquoted you.

It certainly felt to me like you were assuming that this project was using semver and was not following it well, not that you wouldn’t want to use a project that receives this many breaking changes / that doesn’t follow semver. Those complaints both make a lot more sense to me - and I’ve seen many people say similar things about Immich in the past. In fact, it’s a big part of why I haven’t migrated from Photoprism to Immich myself - in this regard they’re complete opposites.

I don’t think there’s any room to argue that announcing a 1.x with a change the developers say is a breaking change, which is what Immich have done, fits within the semver.org guidelines.

That wasn’t the argument.

Following semver is optional. If a project doesn’t explicitly state it is following semver, it shouldn’t be assumed that it is. With regard to Immich in particular, a cursory review of their documentation makes it clear that they are not following semver. Literally, go to https://immich.app/ and read the text at the very top of the page:

⚠️ The project is under very active development. Expect bugs and changes.

Go to the repo and you’ll see the README, which states at the very top:

• ⚠️ The project is under very activedevelopment.
• ⚠️ Expect bugs and breaking changes.

If you can read that, see that they’re on major version 1 with a minor version over 100, and you still think they’re using semver, then that’s on you.

The devs have stated they won’t be using semver until they consider Immich production ready, and that moving to a 1.x version from 0.x was a mistake made some time ago. If you want to think about it as though it is semver, consider the major version to still be 0. See https://github.com/immich-app/immich/discussions/5086#discussioncomment-7593227 for example.

As this project is clearly not following semver, the semver guidelines aren’t applicable and haven’t been violated.

I don’t think there’s any room to argue

Even if semver were applicable, in this case, I would still disagree. The text from semver.org states:

8. Major version X (X.y.z | X > 0) MUST be incremented if any backward incompatible changes are introduced to the public API.

It doesn’t state that any backward incompatible changes, period, require a major version increase, only changes to the public API. I would personally argue that the deployment configuration is part of the public API, but not all project owners agree with me. Even if they do agree, they might say that this was not a documented deployment configuration and thus not part of the public API, and that it therefore doesn’t necessitate an increase to the major version, but as they knew that people were using that configuration, anyway, they included a note about a potentially breaking change as a courtesy to those users.

Immich isn’t a library (the main use case for semver is dependencies that will be pulled into other projects) and as far as I know they don’t state that they use semver.

I’m a millennial and I did it more than once on hardware older than I was, but because I wanted to, not because there were no other options.

There have been so many places in front end web dev that used the abbreviation “a11y” without defining it (or explaining the 11) that for years I assumed it was just the name of a particular library that had gotten Kleenexed.

(To be clear, I’m using “Kleenexed” as a verb here to mean “genericized explosively, as if a sneeze.”)

It didn’t help to look at the code, either. “Okay cool, so all this does is add a bunch of random extra tags to the DOM? Doesn’t seem super useful but okay, I guess there’s probably some tool out there that depends on them but we probably don’t use it.”

Illegal vote suppression elected Trump, but even if it hadn’t, you should blame Democrats before blaming people who voted for third party candidates. Now, if you’re talking about people who “protest voted” by voting for Trump (in both the primaries and the election), then sure. Those people did, in fact, play an instrumental part in electing him.

Why blame Democrats? Well, beyond just kinda being Republican-lites:

• for opposing ranked choice voting (and alternatives)
• for not rallying around progressive candidates
• for not choosing Kamala via primary elections in 2024

Democrats are the bare minimum “harm reduction” party, and I don’t bare any ill will toward people who voted for them rather than a party that would actually try to effect change, but the opposite mindset - blaming third party voters for not voting for Democrats - is very shortsighted. And as third party voters have never had the power to enact RCV or STAR voting or otherwise improve the system, blaming them instead of the Democrats who have had that power is inane.

I’ve voted for a Democrat every single presidential election that I’ve been able to, but I honestly wish I hadn’t. I’d much rather there be more visibility for third parties, and for more people to feel empowered to vote for third party candidates.

I’m lucky enough to be able to budget for things I want. If it’s in the budget, no justification is required. If it’s in the budget but expensive, then I just have to figure out if I want it more than the other things I want (or will want) that I won’t be able to afford as a result.

I hate how much I agree with you in principle and how ugly it looks in practice. With doubled periods, at least - different marks don’t trigger that same reaction. For example, a question mark inside, followed by a period or comma outside feels right.

It’s not grammatically incorrect to end a sentence with a preposition. It’s a common misconception that it is a rule, basically because one guy argued in favor of it back in the 1600s and had some support for formal writing in the 1700s. But it’s never been a broad rule, and even in formal contexts it’s not a rule in any current, reputable style or usage guides (so far as I know, at least).

Some more info on the topic: https://www.merriam-webster.com/grammar/prepositions-ending-a-sentence-with

Glaring doesn’t imply a negative meaning. In this case it’s used to mean “obvious”.

Unless you’re suggesting that “glaring” means “obviously staring” (it doesn’t - that would be “glaringly staring”) this doesn’t make any sense.

“[He’s] glaring at [direct object]” is an example of a sentence that uses the present participle form of the verb “glare,” which explicitly communicates anger or fierceness.

If you’re not convinced, read on.

—————

The verb form that takes an object is:

Glare (verb with object): to express with a glare. They glared their anger at each other

The noun form the above definition references is:

Glare (noun): a fiercely or angrily piercing stare.

“Glaring” can be an adjective and one of those definitions does mean “obvious” or “conspicuous,” but the use of that form of the word doesn’t make sense in her sentence. Think about a comparable sentence like “The undercover operative is conspicuous at the bar,” where the bar is the location. (Even then, most people wouldn’t use “glaring” in that sentence, as “conspicuous” or “obvious” are much less ambiguous; the operative could be staring piercingly or angrily at the bar rather than being glaring while being at the bar.) Another example that makes a bit more sense is “The effect of the invasive plants is glaring at the park.”

But for that interpretation to be valid here, you’d have to:

• believe that the dude is trying to hide/blend in, or otherwise explain how he - not what he’s doing, but the dude himself - is conspicuous
• believe that the woman’s referring to her own ass as a location
• assume that she isn’t commenting on how the guy is looking at her ass, even though the joke depends on giving him something different to look at

That’s a bit of a stretch.

JustWatch is still useful if you want to act like you watched it legitimately, e.g., if a coworker asks where they can watch it. Even if your coworker also pirates, they might not have an account on your private tracker, Usenet, etc…

I may be wrong, as I haven’t actually torrented anything substantial since Demonoid was still a thing, but it all feels less accessible than it used to be.

Current generation iPad Pros and Airs have the same processing power as Apple Silicon Macs. That’s more than enough for Blender. Even the base iPad and the iPad Mini likely have enough processing power - though I don’t think the base iPad has enough RAM.

Does mirroring a screen (or adding a screen) from a computer or connecting to a computer via remote desktop count?

if everyone thought like you no one would create digital media

This is obviously incorrect.

When did Democrats have a supermajority in both the House and the Senate?

Okay, and? What nontechnical user cares enough to use it specifically when they could use Microsoft Office, Google Docs, Polaris Office, MobiOffice, WPS Office, Collabora, etc., instead?

But do nontechnical users care about the “missing” features? A lot of nontechnical users prefer simpler apps.

There is a version of Blender that was made for Android. It’s quite old, though. But if you’re competent enough with Blender that you’ve memorized all its keyboard shortcuts and workflows, you’re likely technical enough to get it working via Termux. But if not, Nomad Sculpt (on both iOS and Android), SpaceDraw (Android only), and several other apps can serve the same purposes.

Not sure why you listed video editing software and two different specific video editors, but Android and iOS both have Lumafusion. I’m sure there are other decent editors but I haven’t used them because Lumafusion is great. iPads do have DaVinci Resolve, though, for what that’s worth. If you care about using a FOSS video editor then you should care enough to install it via Termux. But let’s be real, most nontechnical users are probably happy using CapCut.

DJ software - Cross DJ is free. There are other alternatives. And there are web based DJ software apps like YouDJ.

OnlyOffice is available on Android already.

“any linux app” - I don’t think any nontechnical users want GParted on their Android phones, and it wouldn’t work anyway.

Android has its own games, same as iOS. Nontechnical users are way more likely to want Windows games than Linux games anyway.

Wine used to be developed natively for Android but they stopped a few years back. You can still download it at winehq though. I think Box64 with wine is a decent option?

Overall the thing I’m confused about is why you think Google or any major Android phone manufacturer have a motivation to make native Linux apps more accessible. Google certainly doesn’t want to make it easier for you to use the better versions of their competitors’ apps. Google is moving further away from Linux, not closer. Providing a usable, good enough desktop experience that’s still Android underneath makes far more sense for them.

Fortunately, like I said earlier, there are workarounds to get access to those Linux apps.

The thing that is more likely to change is for the creators of Android apps to build apps that function better when used in a phone-as-desktop format. And even if they don’t, there are enough competent web apps out there that just being able to use your browser full screen on a monitor solves 90% of people’s actual use cases - and probably over 95% when you include the other apps that have decent desktop experiences that can be run alongside them.

The Steam Deck approach is much closer to what you seem to want. The Steam Deck is an actually competent Linux machine that has a Valve-supported compatibility layer in Proton for running non-Linux games. It plugs into a USB-C hub connected to a monitor, mouse, and keyboard just fine, can install any Linux app, etc… It’s completely usable handheld as well. But it isn’t a phone, and even though it’s quite portable, it’s not “stick into your pocket” portable.

I don’t expect a major manufacturer to make a Linux phone any time soon, and I don’t think the Linux phones that are out already have - or will have in the next 5 years - a smooth enough experience to convince any nontechnical user to switch.

There are mobile versions for all of those?