If you buy the one in the image in the post, the metal part screws off from the plastic frame. You could then bend or brake the tab used to solder the cable to the connector (it’s thin) and you would have something closer to the right side image.
Swiftfin is the official Apple TV jellyfin app. Swiftfin is great on iOS, but hasn’t been updated on Apple TV for a while. It also lacks a lot of polish and features but it is being worked on. There should be an update soon.
I’ve been using infuse on Apple TV. Infuse isn’t open source and needs a subscription to watch most 4k hdr content. I think it’s worth it if Swiftfin gets an update soon.
Apple TV is definitely a better experience compared to Samsung and Android. Apps are nicer and there isn’t any ads, privacy controls and privacy statements are much better. Recommended content can also be disabled and only shows when your hovering over the relevant app.
The player does have a large effect on both those things. A player that supports the codec will not need server hw accept and hdr conversion as it will direct stream. A big issues is these codecs can cost money. So if the player doesn’t come with it the player needs to pay for it, something plex may be doing for those that purchased their subscription.
Linoleum isn’t plastic, you may be thinking of vinyl flooring which looks similar. Vinyl is cheaper and newer while appearing very similar to linoleum.
Jellyseer is a jellyfin comparable alternative to ombi.
They couldn’t argue it was the Uncles responsibility to tell the child. The Uncle was told, and would also have been told to not tell the child. They set out to make the child believe they got the PlayStation because they wanted the reaction from the child.
Their isn’t one way to make a flat head screwdriver. Some a chisel and some are slots. The slotted ones are better but more expensive.
Both still slip from the screw and are a pain to manually screw (slotted less so).
Pozi is the best + type screw. It’s pretty much standard for UK construction. The only time a different type is used is sometimes Phillips for plaster board or external hex and internal torx for long or large screws.
A glass may have a spec that allows it to be filled to the brim. Doesn’t mean it’s a good idea, especially when you want to run up stairs with it.
Your going to spill water everywhere.
Your not doing your own research. Your likley not capable of doing such research. Your doctor also isn’t doing their own research. Your doctor does take the knowledge and guidance from those that do research after they’ve done it and it’s be reviewed and validated by national healthcare standards agency.
Much like documentaries much of the available information online that’s accessible and engaging is just entertainment wrapped packaged like your learning something. Especially when your sources lead you to think herbal medicine is a better alternative.
The stuff that works in herbal medicine have been studied and improved in modern medicine. The two can’t and shouldn’t be equated. Anyone claiming herbal medicine should be respected and not condemned is a crook and/or idiot. Most proponents are crooks, trying to sell things they know or don’t care if they work.
Things like paracetamol and lithium have a basis in herbal medicine. Paracetamol was improved to stop the horrendous damage the herbal medicine did to your kidneys. Lithium was quantified and controlled to minimise the impact of taking a toxic mental (Lithium was sold as natural healing waters found in springs, it was scientist investigating these waters that identified lithium as an element), newer less toxic medicines are now available for these conditions.
Medicine displaced herbal remedies. The regulation of medicine means the only practionationers of herbal medicines are unregulated crooks.
Too long in the dryer and they cook. Think of dryered flowers, they go brittle and scratchy when they’ve been dried. When those same flowers are fresh their petals are soft.
Fabric softener is a scam. It just coats your clothes in plastic. It will lead to rougher clothes over time.
Your likely over drying your clothes and causing them to be harder and coarser than they need to. Your then compensating with fabric softener.
RS, not the same breath but the pricing is usually good.
Whenever you get a new router or move somewhere, change the WiFi access point name and password. Set it to the same line you used previously. That way all your devices will connect to it without changing anything.
Use a new unique name and password. Never keep the one that is printed on the back of the router. You can make the password easier to share by making it a few words and numbers. Still very strong, but much easier to say aloud to someone.
People have attached pens to 3d printers and used them to write letters, effectively print. Most consumer 3D printers are useing or based on open source software.
I think the issue is, printers are relatively cheap to buy and replace. So building your own and programming it hasn’t been necessary. Where as 3d printing was completely in accessible before the reprap movement. 3D printing software is open source as it is motivated by people wanting to build their own machines that could build machines. Something you couldn’t easily buy.
A small computer, large capacity ssd and two WiFi interfaces (2x usb dongles, or dongle plus usb).
Small computer could be anything: raspberry pi (or generic and), nuc mini pc or laptop. If you want to use it without a plug you’ll need to add a battery, usb c powered devices could be more convent to power from a battery.
A ssd is better for this use case. Not because it’s faster, but they are more resilient to being knocked about and dropped. They are also much smaller, especially M.2, and aren’t fussy about how they are mounted.
The two WiFi interfaces would allow you to create a WiFi bridge to access the internet through a WiFi network and access your media server. It would need some configuration, you may also need to have the computer act as a router if you want to use multiple devices without reconfiguring.
It may be easier to have your device act as a WiFi hotspot and have the media centre automatically connect to it. This would make it difficult for multiple devices to use it simultaneously, and you could accidentally allow the media centre to do all its updating and downloading over your mobile connection.
This type of thing is going to be expensive and troublesome to configure unless your already experienced with that sort of thing.
I think a better solution, especially if you already have a media server. Is to set your media server for external access.
To get media when you don’t have internet, buy a large capacity flash drive (or external ssd/hdd). When you have access to your media server download all the content you want on to the drive. I think iOS jellyfin can do this without much modification.
Once out of range of your media server. Delete the content you’ve watched on your device (iPad) to free up space. Connect the external drive through the usb port on the iPad, copy over the next lot of content you want to watch. Disconnect and then watch the content.
Jellyfin can download the content, but you may need another app to play it when you don’t have access to the media server.
This approach lets multiple people access a much larger amount of media, effectively simultaneously. It doesn’t require a large amount of often expensive local device storage - you use cheap external storage. It much less expensive if it breaks or gets lost and has very little configuration -if you already have a media server running jellyfin.
You may have an issue with the boot order in your bios. Might be worth looking into. Your bios may try to boot from every other device connected to it before it tries the M2 SSD.
Head and shoulders has anti-fungal properties. That may have been the source of your smelling problem.
Mac isn’t UNIX based, it is UNIX and comes with many of the UNIX tools a user would expect. Completely different situation.
Destroying money would make it more valuable.