I live a mile and a half from the ocean and run my smoker for long periods. It’s really nice to monitor and change the temp while I’m drinking the beer you refer to from the sand. I make a few quick runs back up the hill to tend to things, but mostly I’m free to be elsewhere for the 12-ish hours the smoker is running. It’s really nice, not a hard requirement, but really convenient.
My parents old farmer house had a smoke cabinet (wood chips heating). You put meat in, let it smoke and take smoked meat out, done. Though it makes a mess.
My point is, what do you need to monitor that for?
Depending on the internal temperature curve I may need to change cook temps in the pit, which I can do remotely. I also monitor the curve to determine when to spray and wrap, and other activities, depending on what is smoking.
1-200 depending on 2 or 4 channel version, legally can only be used in the us and Canada because they use a custom rf protocol. As a result the range is 1.24 miles. Thermoworks is pricey shit but it lasts long, can be calibrated, and generally is one of the most accurate cooking thermometers you can buy
(albeit much much much more expensive than a $10-30 k type thermocouple and a used reader for $50 that is way more precise and usually will do data logging) also granted for most people a $20-40 thermometer would be fine with like 300-500ft range
My issue with “smart” anything is not the inherent concept, it’s the execution 99% of the time. I have plenty of smart stuff in my house but it’s almost never convergence devices. I’ve learned that these types of devices are more than anything designed to be disposable trash. Designed as cheap as possible, cut as many corners, introduce as many security holes as possible, etc. we have 0 consumer rights so even if it’s strong they’ll change the tos after the fact when their profits fall and they need to make the line go up.
So it comes to this. I’m not opposed to “smart” devices. They just have to occur in a dumb, roundabout way. They have to work without being connected to the internet, or in some rare cases by being bridged to the internet via home assistant from an isolated vlan. If I want a smoker I can monitor on the fly I will look at something like that thermometer paired with a standard steel smoker that will last decades. If I need to adjust it remotely I will look at why I need this option first: is it realistic that I would just adjust it without checking the contents? If I would then check open source and if nothing exists make it. It sucks but this where our garbage profit driven society led us, to shitty products that fill landfills and waste resources
You make some good points.
I live a mile and a half from the ocean and run my smoker for long periods. It’s really nice to monitor and change the temp while I’m drinking the beer you refer to from the sand. I make a few quick runs back up the hill to tend to things, but mostly I’m free to be elsewhere for the 12-ish hours the smoker is running. It’s really nice, not a hard requirement, but really convenient.
My parents old farmer house had a smoke cabinet (wood chips heating). You put meat in, let it smoke and take smoked meat out, done. Though it makes a mess.
My point is, what do you need to monitor that for?
Depending on the internal temperature curve I may need to change cook temps in the pit, which I can do remotely. I also monitor the curve to determine when to spray and wrap, and other activities, depending on what is smoking.
Expensive options: thermoworks smoke-x
1-200 depending on 2 or 4 channel version, legally can only be used in the us and Canada because they use a custom rf protocol. As a result the range is 1.24 miles. Thermoworks is pricey shit but it lasts long, can be calibrated, and generally is one of the most accurate cooking thermometers you can buy
(albeit much much much more expensive than a $10-30 k type thermocouple and a used reader for $50 that is way more precise and usually will do data logging) also granted for most people a $20-40 thermometer would be fine with like 300-500ft range
My issue with “smart” anything is not the inherent concept, it’s the execution 99% of the time. I have plenty of smart stuff in my house but it’s almost never convergence devices. I’ve learned that these types of devices are more than anything designed to be disposable trash. Designed as cheap as possible, cut as many corners, introduce as many security holes as possible, etc. we have 0 consumer rights so even if it’s strong they’ll change the tos after the fact when their profits fall and they need to make the line go up.
So it comes to this. I’m not opposed to “smart” devices. They just have to occur in a dumb, roundabout way. They have to work without being connected to the internet, or in some rare cases by being bridged to the internet via home assistant from an isolated vlan. If I want a smoker I can monitor on the fly I will look at something like that thermometer paired with a standard steel smoker that will last decades. If I need to adjust it remotely I will look at why I need this option first: is it realistic that I would just adjust it without checking the contents? If I would then check open source and if nothing exists make it. It sucks but this where our garbage profit driven society led us, to shitty products that fill landfills and waste resources